Controllerless Networks

Reply
Contributor II
Posts: 49
Registered: ‎02-03-2016

VLAN Assignment Rules Limit

Hi!

 

From the discussion http://community.arubanetworks.com/t5/forums/v3_1/forumtopicpage/board-id/IAP/thread-id/4980/page/1 I've learned, that there are no more than 8 VLAN Assignment rules possible.

 

I'm in an migration phase from HPE MSM Controller to Instant VC.

With the MSM Controller I'm using the internal Radius Server (as I don't have any usable server at the customer location...) and have lots of teams with specific usernames, for which I've configured egress vlans on the MSM.

 

With the Instant VC I can only configure 8 vlans in that manner - is that still the only way to use it?

Now I seriously stuck in the migration with this limit.

 

Any idea how I can assign 30+ VLANs with the Instant VC and without an external Radius Server?

 

With kind regards

Manfred

Guru Elite
Posts: 21,491
Registered: ‎03-29-2007

Re: VLAN Assignment Rules Limit

There might be a way. What is being used to determine what vlan a user ends up in?


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 49
Registered: ‎02-03-2016

Re: VLAN Assignment Rules Limit

I'm using the Username as attribute.

 

Usernames are in the format:

 

Team001

Team002

Team003

.

.

.

 

User Team001 has egress VLAN 10

User Team002 has egress VLAN 20

.

.

.

 

What I've testet:

set-vlan User-Name equals Team002 20

This works - but only up to 8 rules

 

With kind regards

Manfred

Search Airheads
Showing results for 
Search instead for 
Did you mean: