Controllerless Networks

Reply
Contributor I
Posts: 79
Registered: ‎03-03-2015

What are the firewall ports required in between IAP & Airwave except 443?

Hi Guys,

 

As title said, i don't see any documentation indicates the proper firewall ports to be openened for IAP - Airwave deployment except controller only.

 

As I know, port 443 is the port required.

But how about tftp & ftp port for firmware push?

Also the AMON 8211 port? Should it be included as well?

 

Thanks.

Guru Elite
Posts: 21,274
Registered: ‎03-29-2007

Re: What are the firewall ports required in between IAP & Airwave except 443?

Only port 443. Please check the Instant VRD.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 79
Registered: ‎03-03-2015

Re: What are the firewall ports required in between IAP & Airwave except 443?

Hi cjoseph,

 

does it mean port 443 will serve all the purpose like apprf data collection, config push, ap status, firmware upgrade ?

 

Thanks.

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: What are the firewall ports required in between IAP

Like cjoseph mentioned , you should take a look at the Aruba instant VRD page 17 / IAP > AirWave communication
http://community.arubanetworks.com/t5/Validated-Reference-Design/Aruba-Instant-Validated-Reference-Design/ta-p/258782
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 79
Registered: ‎03-03-2015

Re: What are the firewall ports required in between IAP

ya, found it.

Thanks Victor & Cjoseph

Search Airheads
Showing results for 
Search instead for 
Did you mean: