Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Why would mesh be disabled on a an IAP-115 running 6.3 code%3F

This thread has been viewed 1 times

  • 1.  Why would mesh be disabled on a an IAP-115 running 6.3 code%3F

    Posted Jul 27, 2014 08:00 PM

    Hello All,

    I have one IAP-224, running as a VC that i want to use as a mesh portal and one IAP-115 which i am trying to setup as a mesh point. If i plug the IAP-115 into the L2 network, it becomes part of the cluster no problem. As soon as i disconnect the ethernet and turn it back on, it elects itself master and finally reboots after about 2 or 3 minutes.

     

    Both my IAP-224 and IAP-115 tell me MESH not supported in the mode

     

    I had also tried turning on bridging for ethernet 0 but all that really does is bypass teh uplink check and not much else.

     

    Anyone have any ideas as to what might be wrong?



  • 2.  RE: Why would mesh be disabled on a an IAP-115 running 6.3 code%3F
    Best Answer

    EMPLOYEE
    Posted Jul 27, 2014 08:02 PM
    Mesh is not currently supported on 11ac access points.


  • 3.  RE: Why would mesh be disabled on a an IAP-115 running 6.3 code%3F

    Posted Jul 27, 2014 08:39 PM

    As cappalli mentioned Mesh is not supported on the IAP-22x till later this year.

     

    Also, for the IAP-115 to join a Mesh you need to make sure "Extended SSID" is disabled.   This is found under System ->Advanced Options.