Hi,
I can't seem to get an zero-touch provisioned IAP to be placed in the right group and folder in AirWave.
Configured these options in the DHCP server:
option 60 text "ArubaInstantAP"
option 43 text “PoC,10.30.2.31,MaxedaShop"
option 42 ip 10.30.2.20
Connected to the console of the IAP, i see the following output:
[snippet]
Getting an IP address...
Jan 1 00:00:31 udhcpc[2988]: udhcpc (v0.9.9-pre) started
Jan 1 00:00:31 udhcpc[2988]: send_discover: pkt num 0, secs 0
Jan 1 00:00:31 udhcpc[2988]: Sending discover...
Jan 1 00:00:31 udhcpc[2988]: send_selecting: pkt num 0, secs 0
Jan 1 00:00:31 udhcpc[2988]: Sending select for 10.34.249.192...
Jan 1 00:00:31 udhcpc[2988]: Lease of 10.34.249.192 obtained, lease time 691200
Jan 1 00:00:31 udhcpc[2988]: DHCP OPT 60 is not ArubaAP
Jan 1 00:00:31 udhcpc[2988]: DHCP OPT 60 is ArubaInstantAP
Jan 1 00:00:31 udhcpc[2988]: DHCP OPT 43, len: 25, buf: PoC,10.30.2.31,MaxedaShop
Jan 1 00:00:31 udhcpc[2988]: ams-ip: 10.30.2.31, length of ams-key: 10
Jan 1 00:00:31 udhcpc[2988]: DHCP OPT 42, len: 4, ip: 10.30.2.20
[ 47.125242] ip_time_handler: Got ip and packets on bond0 Started master election 3-0, rand 20
10.34.249.192 255.255.255.0 10.34.249.10
Compressing all files in the /etc/httpd directory...
Done.
Starting Webserver
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
NTP server 10.30.2.20 received via DHCP option.
Launching NTP Client on 10.30.2.20
[ 57.960980] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D)
[ 58.035301] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[ 58.146641] ath_dfs: Version 2.0.0
[ 58.146672] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[ 58.284442] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[ 58.397375] ath_pci: (Atheros/multi-bss)
[ 58.432895] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
[ 58.500812] ath_pci 0000:01:00.0: ath DEBUG: sc=0xd994dc00
[ 64.251483] Startup Mode-0 set
[ 64.277038] htt_peer_map_timer_init Enter pdev d9884000 hrtimer d9886790
[ 64.355670]
[ 64.355670] htt_alloc_peer_map_mem : Alloc Success : host q vaddr ddf17000 paddr 5f417000
[ 64.472352]
[ 64.472352] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
[ 64.573508] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d9920000
[ 64.669197]
[ 64.669197] SERIAL NUMBER: : wifi0
[ 64.669197]
[ 64.745267] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
[ 64.897906] wmi_ready_event_rx: WMI UNIFIED READY event
[ 64.950078] target uses HTT version 2.2; host uses 2.2
[ 65.051140] ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
[ 65.125179] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
[ 65.211652] dfs_attach: event log disabled by default
[ 65.275226] -1077438292: dev:<wifi0> ic:d6780540 osdev:d994dc10 phy:2wifi0: Base BSSID 34:fc:b9:e7:69:90, 16 available BSSID(s) processor ID: 0
[ 65.426179] bond0 address=34:fc:b9:c6:76:98
[ 65.476194] br0 address=34:fc:b9:c6:76:98
[ 65.524117] wifi0: AP type AP-315, radio 0, max_bssids 16
[ 65.588784] Resetting spectral chainmask to Rx chainmask
[ 65.755576] Resetting spectral chainmask to Rx chainmask
[ 65.806935] Init the PCAP for radio0 offload 1.
[ 65.861230] PCI: enabling device 0000:03:00.0 (0140 -> 0142)
[ 65.928834] ath_pci 0000:03:00.0: ath DEBUG: sc=0xd7abcc00
[ 67.232114] Startup Mode-0 set
[ 67.257919] htt_peer_map_timer_init Enter pdev dcac0000 hrtimer dcac2790
[ 67.336363]
[ 67.336363] htt_alloc_peer_map_mem : Alloc Success : host q vaddr d7f5b000 paddr 5945b000
[ 67.453014]
[ 67.453014] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
[ 67.554201] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d6720000
[ 67.649890]
[ 67.649890] SERIAL NUMBER: : wifi1
[ 67.649890]
[ 67.725929] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event
[ 67.879350] wmi_ready_event_rx: WMI UNIFIED READY event
[ 67.931583] target uses HTT version 2.2; host uses 2.2
[ 67.938144] ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna.
[ 67.938144] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
[ 67.938175] dfs_attach: event log disabled by default
[ 67.939925] -1077438292: dev:<wifi1> ic:d6880540 osdev:d7abcc10 phy:2wifi1: Base BSSID 34:fc:b9:e7:69:80, 16 available BSSID(s) processor ID: 0
[ 67.939956] bond0 address=34:fc:b9:c6:76:98
[ 67.939956] br0 address=34:fc:b9:c6:76:98
[ 67.939956] wifi1: AP type AP-315, radio 1, max_bssids 16
[ 67.939956] Resetting spectral chainmask to Rx chainmask
[ 67.939987] Resetting spectral chainmask to Rx chainmask
[ 67.940174] Init the PCAP for radio1 offload 1.
[ 67.943611] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[ 67.943642] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
AP rebooted caused by cold HW reset(power loss)
shutting down watchdog process (nanny will restart it)...
<<<<< Welcome to the Access Point >>>>>
Completed SW FIPS KAT test
[ 70.198281] busybox (3289): /proc/3287/oom_adj is deprecated, please use /proc/3287/oom_score_adj instead.
User: [ 72.123180] Kernel watchdog refresh ended on core 1.
[ 72.125179] Kernel watchdog refresh ended on core 0.
[ 87.271165] i am master now
[ 87.292064] (09:26:01) !!! Init ---> Master
[ 87.342049] asap_send_elected_master: sent successfully
[/snippet]
The IAP shows up in AirWave, but not in the folder or group "PoC".
In the event log of AirWave, I see the following message I left out the IP/serial/MAC):
First:
"Instant AP with IP <IP address> (AP Info <serial>, <MAC address>, AP-315)PSK based authentication: swarm not found in amp and trying to ceate."
Then:
"Aruba Instant Virtual Controller" instant-<partial MAC> Discovered"
After which this message keeps getting logged every 2 minutes:
"Instant AP with IP <IP address> (AP Info <serial>, <MAC address>, AP-315)PSK based authentication: swarm is not approved in AirWave."
Any ideas on how to fix this (approve the swarm, how and where)?
IAP-315 running 6.5.0.0-4.3.0.0 (factory default)
AirWave 8.2.3
Regards,
Dante