Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to AP's

This thread has been viewed 3 times

  • 1.  can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to AP's

    Posted Nov 03, 2014 02:01 PM

    can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to limited number of AP's like the aruba controller?

     

    also and you do the same with 2.4 and 5 Ghz? turn off 2.4 on all but a few APs? on the same virtual controller

     



  • 2.  RE: can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to AP's

    EMPLOYEE
    Posted Nov 03, 2014 02:02 PM

    Use the "Zone" settings. These are similar to AP groups in controllers.

     

    http://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/CustomizeIAPParams/Conf_zone_settings.htm



  • 3.  RE: can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to AP's

    Posted Nov 03, 2014 04:41 PM
    You can use the AP Zones feature to control which AP broadcast which SSID. Just assign a zone name to an SSID and then to the APs that should broadcast it.

    You can also turn off the 2.4G or 5.0G client access function on individual APs by putting a particular radio on a particular AP to Air Monitor mode.

    Thanks,

    Yan Liu