Controllerless Networks

Reply
MVP
Posts: 1,414
Registered: ‎11-30-2011

fixed IP info for IAP

probably totally overlooking this but how can i set fixed IP info for an IAP? I can set the virtual controller ip itself and then connect fine, but how to set gateway / mask / ...?
Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: fixed IP info for IAP

The virtual controller IP you speak of is used to have a static IP to manage a multi-Instant  AP network.   It is assigned to the IAP that becomes a Virtual Controller in the event the initial one fails.  There is no way to set the mask or gateway for this setting.

 

To give the IAP itself a static IP, click the IAP you want to change under the Access Points tab.  Click Edit. You can change the name and IP (mask,gw,dns,etc.).

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

MVP
Posts: 1,414
Registered: ‎11-30-2011

Re: fixed IP info for IAP

thanks, as expected i totally overlooked it, will give it a try when i boot it again.

Search Airheads
Showing results for 
Search instead for 
Did you mean: