Controllerless Networks

Reply
Contributor I

i have poor coverage for Aruba IAP 205 .

 i have signal strength 70 dbm when the distance between the client and the AP is 6 Meters , using WiFi analyzer ,

 

please advise

tm
New Contributor

Re: i have poor coverage for Aruba IAP 205 .

Hi, whats the value of the signal (transmit power) ? Do you use ARM?


#AirheadsMobile
Contributor I

Re: i have poor coverage for Aruba IAP 205 .

i left it as default , the ARM is between 18 and 33 .

tm
New Contributor

Re: i have poor coverage for Aruba IAP 205 .

so your config didn't should the source of your problem. Two posibilitys: failure during mesurement or AP is defective. Do you have bad user experience ? Is this the only AP in area?


#AirheadsMobile
Contributor I

Re: i have poor coverage for Aruba IAP 205 .

No its new AP from the packet .

Guru Elite

Re: i have poor coverage for Aruba IAP 205 .

Do you have more than one AP in that cluster, or just a single AP?

Does the AP use external antennas?

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
tm
New Contributor

Re: i have poor coverage for Aruba IAP 205 .

205 is with internal Antennas


#AirheadsMobile
Guru Elite

Re: i have poor coverage for Aruba IAP 205 .

Can you connect that client to the AP and see what the client signal strength is?

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: