Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

iAP 105 not accepting default password

This thread has been viewed 18 times

  • 1.  iAP 105 not accepting default password

    Posted May 08, 2015 03:22 AM

    Hi Airheads,

     

    I tried "factory reset" button and cli "factory_reset, purgeenv, save & reset". However, the iAP 105 is still not accepting the default user/pw "admin/admin". Kindly help.

     

    Thanks,

     



  • 2.  RE: iAP 105 not accepting default password

    Posted May 08, 2015 04:28 AM

    Hi,

     

    Which code you are using ? what is the error message it throwing ?

     

    Please feel free fo any further help on this.



  • 3.  RE: iAP 105 not accepting default password

    Posted May 08, 2015 04:59 AM
    Hi, ArubaOS Version 6.3.1.4-4.0.0.5 (build 43022 / label #43022) There is no error: User: admin Password: User: I already put admin/admin, password/forgetme! but i still can't get in the cli. Regards,


  • 4.  RE: iAP 105 not accepting default password

    Posted May 08, 2015 07:01 AM
    I suggest using the push pin to factory reset on the IAP vs using the factory_reset command. Try that and see if it works.
    It seems that your factory reset is not erasing the previous user/pass. Try the push pin


  • 5.  RE: iAP 105 not accepting default password

    Posted May 08, 2015 07:03 AM

    I also tried that method but still not able to get in via admin/admin default credentials

     

    Thanks,



  • 6.  RE: iAP 105 not accepting default password

    Posted May 08, 2015 07:46 AM
    Have you tried this

    community.arubanetworks.com/t5/Controller-less-WLANs/How-do-I-reset-the-password-of-an-IAP/ta-p/181306