Controllerless Networks

Reply
Occasional Contributor I

iap 205 getting error limited connectivity

hi
i have 3 205 iap which connected together we have 5 hp switch single network no vlan am getting error limited connectivity also all lan user getting Aruba ssid name on lan connection what will be the problem we are using sonic wall firewall for dhcp

Guru Elite

Re: iap 205 getting error limited connectivity

Is the VLAN under your SSID "virtual controller assigned" or "network assigned"?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: iap 205 getting error limited connectivity

network assigned  ip address assgin by sonicwall dhcp  

Re: iap 205 getting error limited connectivity

Is your Sonic Wall configured with the VLAN's for the SSID? What happens if you plug a wired client into a switch port on the same VLAN, do they obtain an IP address? Is the default gateway for the clients not the Sonic Wall, in that case do you need an ip-helper?


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: iap 205 getting error limited connectivity

Is your Sonic Wall configured with the VLAN's for the SSID?

it is single vlan lan and wan  

What happens if you plug a wired client into a switch port on the same VLAN, do they obtain an IP address?

yes

Is the default gateway for the clients not the Sonic Wall

sonicwall we set default gateway 

Re: iap 205 getting error limited connectivity

I expect the issue is with your VLAN tagging. Are all the same VLAN's being used for IAP, Sonic Wall and the SSID in question? The IAP traffic will be untagged and the client traffic will be tagged.

 

Try setting your Client IP Assignment to Virtual Controller Managed as a test.


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: iap 205 getting error limited connectivity

Are all the same VLAN's being used for IAP, Sonic Wall and the SSID in question? 

yes we are using same vlan for wifi and lan 

if assign virtually control managed ip that will create different range ip that will think that will cause problem for active directory sync 

Guru Elite

Re: iap 205 getting error limited connectivity

Do you have the VLAN set to 1?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: iap 205 getting error limited connectivity

Do you have the VLAN set to 1?

Client ip assigned  network assigned

Client vlan assignment  default  i think  it should be vlan 1

it showing like  this   vlan  --    ?   

am not sure it is vlan 1 

Guru Elite

Re: iap 205 getting error limited connectivity

Do you have clients assigned to a role that is firewalling traffic?  You need to allow dhcp if that is the case, or remove all restrictions on client traffic.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: