Data Center

Reply
Occasional Contributor II

Tx power

Hi,

What is the impact of tx power adjustment ?

Thanks

Re: Tx power

what's your issue? there could be no impact it all depends on your use care and/or current problem
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACCA
[If you found my post helpful, please give kudos!]
Occasional Contributor II

Re: Tx power

Hi,

Current problem I have coverage issue . but with another vendor i had an issue like co-channel interfearence when the power has increased . Is there any other parameter needed to be considered when  tx value change ?

Thanks

Guru Elite

Re: Tx power

You need to measure and manage channel utilization when you increase the power.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: Tx power

Hi

 

Can you give a brief how can i do that (measure and channel utilization)

Thanks

Guru Elite

Re: Tx power

Is this an IAP cluster, or controller-based?

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: Tx power

Its controller based 

Guru Elite

Re: Tx power

You should be able to see the RF utilization on the dashboard for all of your access points.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: