Fórum Portugues

Reply
New Contributor

IAP 103 - new SSID

I need to create a new network using new IAPs-103-RW, but I already have some IAP in the company connected.

When I try configurated the new 3 IAPs in a new SSID and connect on the network, they bring the configuration from another IAP.

I don't want them to use the settings already installed and those that are not using the settings that I will do.

 

Guru Elite

Re: IAP 103 - new SSID

an IAP when placed in the same layer 2 subnet as the first  IAPs will always get the configuration of those access points.

 

You can try changing the parameter here:  https://www.arubanetworks.com/techdocs/Instant_83_WebHelp/Web_Help_Index.htm#Instant_CLI/allow-new-aps.htm to NO in the original cluster, and see if you can bring up new access points on the same layer 2 network as a separate cluster.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: