Foro en Español

Reply
New Contributor
Posts: 3
Registered: ‎01-05-2015

AP-105 Se reinicia constantemente

Buenas tardes, 

 

Tengo un AP-105 que deseo configurar pero conectándome por consola veo que se reinicia constantemente.

 

He capturado lo siguiente por si os puede valer de ayuda para saber lo que le ocurre. He probado a hacerle un factory reset desde el menu boot y también manteniendo pulsado el botón de reset pero no ha funcionado.

 

Gracias y un saludo.

 

APBoot 1.2.4.4 (build 26618)

Built: 2011-01-07 at 13:42:04

 

Model: AP-10x

CPU:   AR7161 revision: A2

Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz

DRAM:  128 MB

POST1: passed

Copy:  done

Flash: 16 MB

PCI:   scanning bus 0 ...

       dev fn venID devID class  rev    MBAR0    MBAR1    MBAR2    MBAR3

       00  00  168c  0029 00002   01 10000000 00000000 00000000 00000000

       01  00  168c  0029 00002   01 10010000 00000000 00000000 00000000

Net:   eth0

Radio: ar922x#0, ar922x#1

 

Hit <Enter> to stop autoboot:  0

Checking image @ 0xbf100000

 

Image is signed; verifying checksum... passed

Signer Cert OK

Policy Cert OK

RSA signature verified.

ELF file is 32 bit

Loading .text @ 0x80e00000 (5645032 bytes)

Loading .data @ 0x813622f0 (32 bytes)

Clearing .bss @ 0x81362310 (16 bytes)

## Starting application at 0x80e00000 ...

Uncompressing.....................................................

Aruba Networks

ArubaOS Version 6.2.1.2 (build 38532 / label #38532)

Built by p4build@cyprus on 2013-05-30 at 17:58:04 PDT (gcc version 4.3.3)

CPU Rev: aa

71x CPU

Flash variant: default

Cache parity protection disabled

Using 340.000 MHz high precision timer. cycles_per_jiffy=680000

Memory: 120960k/131072k available (1920k kernel code, 10036k reserved, 756k data, 4740k init, 0k highmem)

detected lzma initramfs

initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=21280256

LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com> .....................................................................................................................................................................................................................................................................................................................................

AR7100 GPIOC major 0

wdt: registered with refresh

Enabling Watchdog

Talisker RSSI LED initialization

Creating 1 MTD partitions on "ar7100-nor0":

0x00000000-0x01000000 : "flash"

i2c /dev entries driver

i2c-talisker: using default base 0x18040000

AD7416 driver probing for devices on AR7100 I2C

.<6>lo: Disabled Privacy Extensions

IPv6 over IPv4 tunneling driver

 

Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT

Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT

Starting Kernel DES KAT ...Completed Kernel DES KAT

Starting Kernel AES KAT ...Completed Kernel AES KAT

 

Domain Name: arubanetworks.com

No panic info available

Testing TPM... Passed

ag7100_mod: module license 'unspecified' taints kernel.

AG7100: Length per segment 512

AG7100: Max segments per packet 4

AG7100: Max tx descriptor count    400

AG7100: Max rx descriptor count    252

AG7100: fifo cfg 3 018001ff

AG7100CHH: Mac address for unit 0

AG7100CHH: d8:c7:c8:ce:5c:f2

ATHRF1: Port 0, Neg Success

ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 0

AP xml model 39, num_radios 2 (jiffies 5503)

init_asap_mod: installation:0

radio 0: band 1 ant 0 max_ssid 8

radio 1: band 0 ant 0 max_ssid 8

setting bond0 as bridge child

setting gre0 as split child

Starting watchdog process...

Getting an IP address...

ag7100_ring_alloc Allocated 4800 at 0x86b86000

ag7100_ring_alloc Allocated 3024 at 0x86e25000

AG7100: cfg1 0xf cfg2 0x7014

ATHRF1: Port 0, Neg Success

ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 3100

AG7100: unit 0 phy is up...RGMii 100Mbps full duplex

AG7100: pll reg 0x18050010: 0x1099  AG7100: cfg_1: 0x1ff0000

AG7100: cfg_2: 0x3ff

AG7100: cfg_3: 0x18001ff

AG7100: cfg_4: 0xffff

AG7100: cfg_5: 0x7ffef

AG7100: done cfg2 0x7115 ifctl 0x10000 miictrl 0x12

Writing 4

10.40.0.46 255.255.255.0 10.40.0.1

Running ADP...Done. Master is 10.40.0.155

ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D)

ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved

ath_rate_atheros: Aruba Networks Rate Control Algorithm

ath_dfs: Version 2.0.0

Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

ath_spectrum: Version 2.0.0

Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved

ath_pci: 0.9.4.5 (Atheros/multi-bss)

wifi0: Base BSSID d8:c7:c8:65:cf:28, 8 available BSSID(s)

bond0 address=d8:c7:c8:ce:5c:f2

br0 address=d8:c7:c8:ce:5c:f2

wifi0: AP type AP-105, radio 0, max_bssids 8

wifi0: Atheros 9280: mem=0x10010000, irq=49 hw_base=0xb0010000

wifi1: Base BSSID d8:c7:c8:65:cf:20, 8 available BSSID(s)

bond0 address=d8:c7:c8:ce:5c:f2

br0 address=d8:c7:c8:ce:5c:f2

wifi1: AP type AP-105, radio 1, max_bssids 8

wifi1: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000

ath_ahb: 0.9.4.5 (Atheros/multi-bss)

 

Starting FIPS KAT ... Completed FIPS KAT

 

AP rebooted Fri Dec 31 16:00:43 PST 1999; SAPD: Unable to contact switch: HELLO-CONFIG_ERR. Last Ctrl msg: HELLO len=1010 dest=10.40.0.155 tries=1 seq=0

shutting down watchdog process (nanny will restart it)...

 

        <<<<<       Welcome to the Access Point     >>>>>

 

~ # cert_cap=0

The system is going down NOW !!

Sending SIGTERM to all processes.

Please stand by while rebooting the system.

Restarting system.

.

 

 

Aruba Employee
Posts: 63
Registered: ‎11-18-2011

Re: AP-105 Se reinicia constantemente

Hola,

 

puedes comprobar si tienes suficientes licencias en el controlador? Copianos por aqui los resultados de hacer un show license y un show ap active.

 

Saludos

Search Airheads
Showing results for 
Search instead for 
Did you mean: