10-20-2013 01:13 AM
I just recived one AP-225, i used poe from our Juniper EX4200-48P, power indicator always shows red, what this indications means, what's the power requiremnt for AP 225. Users are able to connect, 5Ghz band PHY is ac 80MHz and 2.4GHz is n 20MHz.
10-20-2013 08:08 AM
What AOS version do you have installed ?
Are you using af ot .3af or 3at ?
What can you see on the when console into the AP?
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
10-20-2013 08:41 AM
The 'red' you see is probably Orange/Amber considering you see the SSIDs come up. I often see end-users interpret our orange/amber LEDs as 'red'. Easy to confuse...I've done it myself ;)
Per the chart in the last posting, that just means Power-Saver mode, due to getting 802.3af from your LAN switch.
FYI, upgrading to AOS 6.3.1.x (when appropriate for you) will enhance the performance of your AP-225 while in this power saver mode/getting 802.3af power.