Higher Education

Hi,

I just recived one AP-225, i used poe from our Juniper EX4200-48P, power indicator always shows red, what this indications means, what's the power requiremnt for AP 225. Users are able to connect, 5Ghz band PHY is ac 80MHz and 2.4GHz is n 20MHz.

Thanks

What AOS version do you have installed ?

Are you using af ot .3af or 3at ?

What can you see on the when console into the AP?

The 'red' you see is probably Orange/Amber considering  you see the SSIDs come up.   I often see end-users interpret our orange/amber LEDs as 'red'.   Easy to confuse...I've done it myself ;)

Per the chart in the last posting, that just means Power-Saver mode, due to getting 802.3af from your LAN switch.

FYI, upgrading to AOS 6.3.1.x (when appropriate for you) will enhance the performance of your AP-225 while in this power saver mode/getting 802.3af power.

JF

Thank you for the post, what is poe power save mode.

What 63 code do you have installed ? Are you using .3af for PoE ?

I have attached the 6.3.1.x release notes 

Attachment(s)

ArubaOS 6.3.1 Release Notes.pdf   650 KB 1 version

we use 6.3.0.2.

thanks

As of release 6.3.1.x you will have additional performance on the AP-225.   Consider upgrading to that release train when appropriate for you if you need additional performance on the Ap-225.

JF