Reply
New Contributor
Posts: 2
Registered: ‎01-28-2016

Meridian Navigation Slow

Hi,

We deployed a meridian installation in our office and the navigation is very slow. I use the appviewer to test the navigation. When I open the map, my position is accurate. But when I move or start the navigation and move, the Blue dot moves very slowly.
It takes >30 seconds , which is a long time for a navigation. It does not jump, it just moves the right way very slowly.

Is there any limitation with using the appviewer ?

Thanks
Chris
MVP
Posts: 514
Registered: ‎11-04-2011

Re: Meridian Navigation Slow

Chris,

 

Please double-check that you have set the Control points on all of your maps. To do so, go to maps, press the 'Edit' (pencil) for each map, and set the control points:

2017-02-01 18_26_18-HPE Aruba Amstelveen - Meridian.png

I know it sounds strange to link delays to not setting the control points, but I have seen it happen a few times.

 

As a guidance always set the control points first thing when you start doing work on a map.

 

Herman

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
New Contributor
Posts: 2
Registered: ‎01-28-2016

Re: Meridian Navigation Slow

thanks herman, the missing control points caused our problems.

Search Airheads
Showing results for 
Search instead for 
Did you mean: