Reply
New Contributor

What happens when I have 4 APs close to each other

Can someone please explain the sequence what happen if you install 4 APs close to each other, mainly on the 2.4 gig . Thanks

Re: What happens when I have 4 APs close to each other

 

 

When you have APs too close to each other you could experience some performance issues even if the APs are on different channels since the channel side bands could still make an impact on the other channel and create radio congestion.

 

That's why is recommended to have APs 25-30 feet apart 

 

2014-02-18 13_02_14-24.61.6.251_22 - Tera Term VT.png

 

121146.jpg

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor

Re: What happens when I have 4 APs close to each other

Thank you for your reply.  

any idea which channel DFS attempt to use for the 4th AP with channels 1, 6 and 11 used by the othe APs near by?

Re: What happens when I have 4 APs close to each other

 

DFS is use with UNII 2 extended 5Ghz 

 

In regards to the channel assignment if you have ARM turned on , the APs usually scans other channels then it analyzes the interference level seen on other channels and this information is send back to the controller and based on this information the controller will make the best decision on what channel/power each AP will be assigned

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: