Reply
Contributor II
Posts: 75
Registered: ‎05-06-2014

VIA setup "Block traffic until VPN tunnel is up" whitelisting - is this source or destination?

I note that, when using VIA client, you can "Block traffic until VPN tunnel is up".  There is also an option to add a whitelist, to modify this behaviour:

Block traffic rulesSpecify a hostname or IP address and network mask to define a whitelist of users to which the Block traffic until VPN tunnel is up setting will not apply

It's not clear to me whether this whitelists the source or the destination, i.e. :

If this is source whitelisting:   Some of the users within your VIA setup get full Internet, even though the tunnel is down.

Alternatively, if this is destination whitelisting:  All your users get access to these specific websites (e.g. to allow remote support facilities to work), even though the tunnel is down.

Can someone confirm, please?  Thanks...

New Contributor
Posts: 2
Registered: ‎09-11-2016

Re: VIA setup "Block traffic until VPN tunnel is up" whitelisting - is this source or dest

If you are using PureVPN then you have an option of split tunneling

Search Airheads
Showing results for 
Search instead for 
Did you mean: