I am managing my Cisco devices from Airwave. The devices use NTP to update the time. However i see a wrong time zone pushed to my device via Airwave.
Environment : This can happen on any version of Airwave and any supported version of Cisco device.
This happens because of a misconfiguration on the Airwave.
Please see the snips from Cisco device.
The current time on the Cisco device.
We manually configure it on the controller.
(arubalab-device) >config time timezone location 7
After some time we would see the device with incorrect time zone.
Under the Symptoms section we saw that Airwave is pushing delta time zone difference of 6 hours.
This value is configured as shown below.
If we have an offset value here, this same will be pushed to the devices.