Network Management

Reply
Contributor I
Posts: 36
Registered: ‎06-25-2013

AMP database

Hi All, 

 

My client has upgraded from 8.0.11 to 8.0.11.1 and at the end of the upgrade the following message was displayed:

 

***********************************************************************
Your database may have a critical problem that could affect performance.
Please contact Aruba Technical Support
***********************************************************************

 

We have then done the vaccum process and that has completed successfully. 

 

Is there a way we could initiate a check to check the database again to see if this corruption has gone away?

 

Thanks,

Moderator
Posts: 1,251
Registered: ‎10-16-2008

Re: AMP database

Typically if you've already performed the vacuum, you should be okay.  The main issue was the existence of old orphaned data that never got vacuumed.  The check itself is a db table size check, which it's perfectly possible that a db table could grow beyond based on historical data retention values.  If you'd like to, you can open a TAC case to have them run through and check.  Or you can just ignore that message since you know you've already performed the vacuum previously.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
Showing results for 
Search instead for 
Did you mean: