Network Management

Reply
Occasional Contributor II

Re: AirWave 8.2.4 NO CLI

@gweyer Had the exact same issue in vmware. TAC ended up mounting an ISO of airwave and booting into rescue mode to extract what the MAC address of what the virtual adapter use to be. I modified the VM Nic to match the previous MAC adddress and this fixed it.

New Contributor

Re: AirWave 8.2.4 NO CLI

Thank you for the information.  I’ll see if I can get that to work.

Re: AirWave 8.2.4 NO CLI

Hi I have just upgraded yesterday in version 8.2.5 and I miss already the CLI.  Is there a way to add static routes now ?  

Aruba Employee

Re: AirWave 8.2.4 NO CLI

We can add route but need to take TAC help to login as root user to get full shell access.

 

Regards,

Pavan

Occasional Contributor I

Re: AirWave 8.2.4 NO CLI

Is the only option for automated backups in AirWave 8.2.4.1 SCP?  Will FTP become an option in 8.2.5.1?  Also, what are the ramifications of re-enabling root access on the AirWave server?  Is it still supported or will TAC just say sorry, you modifed the install and it's not supported?

Occasional Contributor I

Re: AirWave 8.2.4 NO CLI

I need the ability to enable and disable my amps as before so I am not relaint on the Aruba TAC to upgrade my servers to the latest AMP software.

The ability to see my ifconfig if possible to make sure I am on the correct server or sftp to the server the latest image.

 

I am wasting time I could have my servers updated as it stands I was only able to update my backup, not my primary.

 

To take things like this away only makes more work not less.

 

PLEASE GIVE BACK THE CLI!

 

Thanks!

 

Dan

Moderator

Re: AirWave 8.2.4 NO CLI

In 8.2.5.1, we introduced the enter cmds option.  The enter cmds allows captive CLI access of allowed cmds.  Check out the release notes to see which cmds were added.  There's going to be another round of cmds being added into this same shell in 8.2.6.

 

You can see your network interface setup under advanced -> network config.  There is a feature to expand this for multiple interfaces in 8.2.6.

 

In regards to file transfer, we're looking to make changes to file transfer in 8.2.6 (Investigating FTP, SFTP, HTTPS)

 

In regards to supportability when you maintain root shell access, we will always attempt to try to help recover from a bad state, but we can't guarantee that you haven't done something else that can't be recovered (like changed time to far in the future, where the only recovery is restoring a backup from before the time change).


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company

Re: AirWave 8.2.4 NO CLI

Since file transfer does not work. I really hope you are looking into changes for furture releases.

 

Really troublesome QA

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: