Network Management

Reply
Occasional Contributor II
Posts: 11
Registered: ‎10-30-2011

AirWave - Firewall data

In AirWave 7.7.10, why would we not be seeing any data populating under Home>Firewall? For top 3 destinations or applications, we see "No data available". Is there something that needs to be enabled on the controller?

 

thanks,

 

Kevin

MVP
Posts: 1,111
Registered: ‎10-11-2011

Re: AirWave - Firewall data

On your controller(s), issue the following command:

 

(controller)(config)# firewall-visibility

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
MVP
Posts: 562
Registered: ‎11-28-2011

Re: AirWave - Firewall data

There is something to enable on the controller yes. AMON.

 

At the CLI, this should work as a template to enable it (where X.X.X.X is Airwave).

 

mgmt-server profile amp1
   stats-enable
   tag-enable
   sessions-enable
   misc-enable
   location-enable
 !

mgmt-server type amp primary-server X.X.X.X profile amp1

!

 

Then in Airwave, check AMON is enabled ("Enable AMON Data Collection" set to yes) under AMP Setup>General>Additional AMP Services (bottom right of this screen).

 

Thanks.

 

Kudos appreciated, but I'm not hunting! (ACMX 104)
Search Airheads
Showing results for 
Search instead for 
Did you mean: