Network Management

Reply
New Contributor
Posts: 3
Registered: ‎01-10-2012

AirWave Licensing

[ Edited ]

Hi all!

Maybe it will sound primitive, but still i just can't figure out AW linsening...

For example:

My client wants AirWave for 25 device's but with secondary AW server (in case of primery server to fail)

How must i calculate his license?

Should it look like that:

Base system: AW-25 + AW-25

Support: SA3-AW-25 + SA3-AW-25    ?

Or instead of using AW-25 lincense for secondary server i can choose AW-25-FR ? Will it work like a reserved server?

And how to add lincense for a 1 or 2 devices, in case if that client will "expand" to 27 devices? Just add two AW-EXP1-50 ?

 

Sorry for my bad english.

 

Mirko.

Regular Contributor I
Posts: 179
Registered: ‎04-15-2009

Re: AirWave Licensing

For 25 devices on one server with failover capability for 25 devices on another server, you'd buy 1 x AW-25 and 1 x AW-25-FR (the failover version). Then you'd add SAx-AW-25 and AWx-AW-25-FR (where x is the number of years). 

 

The Failover server works by copying the nightly backup from the primary and taking over for it if there's a failure. 

 

If the client wanted to expand to any number between 26-50, it's necessary to purchase another AW-25 (or to buy AW-50 in the first place). However, once 50 devices are under management, you can purchase devices one at a time with AW-EXP1-50 (one device at the same price/device you pay for 50 devices). AW-EXF1-50 is the Failover part. 

 

 

New Contributor
Posts: 3
Registered: ‎01-10-2012

Re: AirWave Licensing

Thank you very much!

 

PS: Can i find somewhere something like "Aruba licensing guide"?

 

Regular Contributor I
Posts: 179
Registered: ‎04-15-2009

Re: AirWave Licensing

On our public website, I see this doc: http://www.arubanetworks.com/pdf/support/EOL_AirWaveSKUChanges.pdf, which does have a section on licensing. 

Search Airheads
Showing results for 
Search instead for 
Did you mean: