Network Management

Reply
Occasional Contributor I

AirWave Report - Current Down AP's and their MAC?

I want to run a report that lists all current AP's that are down, and for this report to contain the MAC address of the AP.

 

Is this possible, and if so, could someone help please?

Re: AirWave Report - Current Down AP's and their MAC?

Hi,

 

We have Device Uptime & Inventory report type which provide details of uptime of each device and totally types of devices montiored by Airwave.

 

We dont have specific report which provide the list of down devices. We can check the list of down devices by clicking the Down status bar on top and also we can export all the down devices in CSV format.

 

 

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
New Contributor

Re: AirWave Report - Current Down AP's and their MAC?

I recently followed these steps and ran the report with some unusual results.

 

Clicked "Down" > "Expand folders to show all APs/Devices" > "Modify Devices" > Select All > "Run Report"

 

Report Type: Inventory

Include details about every device: Yes

 

 

What I noticed is that most, if not all, of the Down devices have an Uptime, and Enet0 Status of Up. Even APs with Enet0 status of Down report with an Uptime.

 

All Instant environment. Some of the downed devices are Virtual Controllers with static IPs that have adopted a new master. Other downed devices are not pingable, yet still show an uptime in the report.

 

Is this just showing the last reported uptime of the device? Or is something wrong with the way Airwave is collecting information for the report?

 

Running AMP 8.2.3.1

 

Re: AirWave Report - Current Down AP's and their MAC?

Hi,

 

Its a expected behaviour, airwave retain device historical retention data.

 

 

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: