Network Management

Reply
Contributor I
Posts: 44
Registered: ‎07-07-2014

AirWave - disable switch port

Hi,

 

I have a question regarding AW feature. Is AW able to disable switch port which Rouge AP is connected?

Additional is it possible to create a report regarding which ports are currently used? This report help me optimise my networks.

 

Regards,

Mathew

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: AirWave - disable switch port

AirWave cannot automatically disable switch ports where rogues are detected.   Most customers prefer to do this manually once AirWave alerts them of the rogue and switch port and they have confirmed it.  

 

There is a "Daily Port Usage Report" that may give you some insight into your port usage.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Guru Elite
Posts: 21,026
Registered: ‎03-29-2007

Re: AirWave - disable switch port

1.  Airwave cannot disable a physical port that an AP is connected to, but it can signal a Wireless controller to to remediation.

2.  There are wired port reports in Airwave, yes.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 44
Registered: ‎07-07-2014

Re: AirWave - disable switch port

Hi,

 

Thank you very much for but could you tell me something more about wireless controller remediation

Guru Elite
Posts: 21,026
Registered: ‎03-29-2007

Re: AirWave - disable switch port

Airwave would signal to the wireless lan controller that an access point is rogue. The wireless lan controller can do whatever it supports to remediate the rogue access point. Airwave only provides the signal.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: