02-20-2014 08:56 AM
I am very inexperienced with Airwave and I am trying to find a user based on an IP address. We had an incident Yesterday and the only information we have to go on was the IP address. I assume with an IP address there is a way to view historical data i.e Yesterday's information to find out which computer in our enviornment was assigned that IP.
Thanks for the Help.
Solved! Go to Solution.
02-20-2014 10:51 AM
You can use the seach capability within AirWave to show this (search box in the top right; make sure it is searching historical data). The following shows a search for an IP. In this case, 2 clients have had this IP. One active (me) and another one from last week. The association time/duration columns should help you track the device down.
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX
02-20-2014 10:56 AM
That was simple. If I only would have just clicked the down arrow I would have seen those options!
Thanks for your response! (Albeit I feel a little dumb, but that's okay, we all start somewhere)