Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Airwave 8.1 and Client Match

This thread has been viewed 6 times

  • 1.  Airwave 8.1 and Client Match

    Posted Jul 09, 2014 10:14 AM

    Hi,

     

    we have a controller firmware 6.4.0.3 and Airwave 8.1 running.

    In the controller cli I can see client match activity on the controller (show ap arm client-match history).

     

    Can I see the client match activity on the Airwave too?

    Where can I see it?

     

    Thanks



  • 2.  RE: Airwave 8.1 and Client Match

    EMPLOYEE
    Posted Jul 09, 2014 10:16 AM
    It shows up on the client diagnostic screen on the bottom right. There are also pre-built reports.


  • 3.  RE: Airwave 8.1 and Client Match

    Posted Jul 09, 2014 10:53 AM

    ok, on controller we have client match events:

    Capture.JPG

     

     

    But on Airwave we have nothing:

     

    123.JPG



  • 4.  RE: Airwave 8.1 and Client Match

    EMPLOYEE
    Posted Jul 09, 2014 10:58 AM

    Do you have AMON enabled?

     

    Check out this guide by cjoseph

     

    http://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/Why-you-should-always-enable-AMON-on-your-Aruba-Controller-when/ta-p/72104



  • 5.  RE: Airwave 8.1 and Client Match

    Posted Jul 09, 2014 11:07 AM

    yes AMON is enabled

    1234.JPG



  • 6.  RE: Airwave 8.1 and Client Match

    EMPLOYEE
    Posted Jul 09, 2014 11:09 AM
    On the controller as well?


  • 7.  RE: Airwave 8.1 and Client Match

    Posted Jul 09, 2014 11:11 AM

    yes I read this guide before I post my questions and I configured I exactly like this ...



  • 8.  RE: Airwave 8.1 and Client Match

    EMPLOYEE
    Posted Jul 09, 2014 11:13 AM
    If you run the Match Event report, does it contain any data?


  • 9.  RE: Airwave 8.1 and Client Match

    Posted Jul 09, 2014 11:13 AM

    I´ve reboot my Airwave now it works! :-)

     

    Thanks