Network Management

Reply
New Contributor

Airwave 8.2.4 / configuration audit / "import button" is missing

Hello Airheads,

I am wondering how to import a golden configuration into airwave to have a template for auditing.

 

I have an Aruba 7005 controller running 8.1.0.2, which has been discovery successfully. I put the controller in a new group "WLAN" and auditing is enabled:

 

Group settings of device group WLANGroup settings of device group WLAN

In the section "APs/Devices" | Audit | Ican create a backup and see the latest running configuration. But I am missing the "Audit" and "Import" button to start auditing:

 

Audit setting of Aruba 7005 controllerAudit setting of Aruba 7005 controller

 

Auditing for Aruba Switches is working fine for me. Is there any global setting or what is going wrong?

 

Best Regards,

 

Michael 

Re: Airwave 8.2.4 / configuration audit / "import button" is missing

Click on the Manage page and at the bottom right there should be an import button
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
New Contributor

Re: Airwave 8.2.4 / configuration audit / "import button" is missing

Hello Pasquale,

 

thanks for the answer. My view doesn't have a Import button:

 

manage_device.jpg

 

 

I wondering if this a bug in the software or I missed anything.

 

Best Regards,

 

Michael

 

Re: Airwave 8.2.4 / configuration audit / "import button" is missing

Can you send a screenshot?
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
New Contributor

Re: Airwave 8.2.4 / configuration audit / "import button" is missing

Hello Pasquale,

 

sure - here is the complete manage screen of the 7005 controller:

 

manage_device.jpg

 

 

here is the related group config:

 

group-settings.jpg

 

Best Regards,

 

Michael

Aruba Employee

Re: Airwave 8.2.4 / configuration audit / "import button" is missing

Config support is not available for 8.x controller, hence  import settings and config audit as well as template based config wont be available.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: