Network Management

Reply
Super Contributor II

Airwave 8.2.5 no clarity data from instant

Hi Airheads, 

 

I just upgraded a cusotmer to  AMP 8.2.5 and also upgraded their IAP's to 6.5.3.3 and have enabled all clarity services however am only seeing DNS data and nothing for auth / association / dhcp. 

 

confirmed the data is there from IAP console:

 

Clarity config
--------------
Parameter Value
--------- -----
inline Sta stats enabled
inline Auth stats enabled
inline DHCP stats enabled
inline DNS stats enabled

 

show clarity history on the VC shows current data. just nothing in Airwave. 

 

Any ideas? 

 

Scott

 

 

 

 

 

Aruba Employee

Re: Airwave 8.2.5 no clarity data from instant

Hi Scott,

 

if we are using template in Airwave I would request you to add the below config lines towards the end of the template in Airwave.

 

clarity
 inline-sta-stats
 inline-auth-stats
 inline-dhcp-stats
 inline-dns-stats

 

If you use Instant GUI config in Airwave under SERVICES section of the Airwave enable the clarity options.

 

Regards,

Sreedhar

Super Contributor II

Re: Airwave 8.2.5 no clarity data from instant

 I have enabled those settings from the Instant GUI configuration in Airwave. 

 

I verfied this was actually pushed and active by running the CLI commands on the previous post. 

 

New Contributor

Re: Airwave 8.2.5 no clarity data from instant

Hello,

 

same here. Clarity Live shows "No rows available."

 

IAP Cluster:

# show clarity config

Clarity config
--------------
Parameter          Value
---------          -----
inline Sta stats   enabled
inline Auth stats  enabled
inline DHCP stats  enabled
inline DNS stats   enabled

# show clarity history dns

DNS Server Stats Log ---- In History
------------------------------------
Send Time        Server Ip      Max Delay  Min Delay  Avg Delay  RCODE0  RCODE1  RCODE2  RCODE3  RCODE4  RCODE5  Last Query  Last Resp  Samples  Anomaly Cnt  Anomaly Ip    RCODE History
---------        ---------      ---------  ---------  ---------  ------  ------  ------  ------  ------  ------  ----------  ---------  -------  -----------  ----------    -------------
Jan  8 08:33:08  8.8.8.8        50         50         50         1       0       0       0       0       0       3672        3672       1        4            10.10.9.199   (1) 0 0 0 0 0
Jan  8 08:34:08  8.8.8.8        0          0          0          0       0       0       0       0       0       0           0          0        5            10.10.9.199   (0) 0 0 0 0 0

...

 

 

In AMP Setup "Enable Clarity Data Collection:" is "Yes"

Airwave Version: 8.2.5.1

IAP Version: 6.5.4.3

New Contributor

Re: Airwave 8.2.5 no clarity data from instant

correction:
I have data now in Airwave - it took several hours to show up.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: