Network Management

Reply
Community Manager

Airwave 8 - Missing "gcc"

Hey Guys.

 

Im trying to install a fresh version of Airwave 8, virtually (VMWare - 4g mem, 40g hard).

 

Im getting an error when installing CentOS.

 

Missing GCC.PNG

 

If I continue on through this I run into another error.

 

Mssing Kernel Dev.PNG

 

Has anyone encountered this? What was the solution?



Airheads Community - The best place to Connect. Engage. and Learn.

Re: Airwave 8 - Missing "gcc"

You need to install AirWave from boot, by booting off the ISO. You cannot install it from within CentOS. There is no desktop environment with AirWave. It boots off the CD/ISO, installs CentOS, then installs AirWave.

Jerrod Howard
Sr. Technical Marketing Engineer
Guru Elite

Re: Airwave 8 - Missing "gcc"

Did you try to install Centos yourself?  Neither package you reference are in a regular install.

 

It looks like the Kickstarter script for Centos didn't run.  You should not have to choose anything.

 

For simplicity, you should download the pre-built VM.

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Community Manager

Re: Airwave 8 - Missing "gcc"

No I didnt try to install CentOS alone. I am using the .zip file from support site.

 

For the installation followed he steps i usually use.

 

1. create blank vm

2. boot newly created vm from Airwave iso

 

I have never used / wasnt aware of a template VM.



Airheads Community - The best place to Connect. Engage. and Learn.
Guru Elite

Re: Airwave 8 - Missing "gcc"

Please deploy the VMware OVF file. 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: Airwave 8 - Missing "gcc"

I hit the same problem when i follow the same step below

1. create blank vm

2. inside creating VM wizard - installer disc image i point to AMP.iso

3. Power on this virtual hardware after creation

4. hit the same error 

 

I able to install airwave if i did not choose disc image when i creating the VM

1. create blank vm

2. inside creating VM wizard - choose i will install the os later

after the Blank VM is created then i load the ISO into the cd drive 

now airwave can install as normal

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: