Network Management

Reply
Occasional Contributor I
Posts: 6
Registered: ‎09-30-2014

Airwave AP Heat Map

I was wondering if anyone encountered a problem wherein, I placed an AP on VisualRF and the heatmap is not showing up.  All the other AP's on the map are showing up with the heat signal.  I have checked the 11ac and 11ng statuses and they are showing ok and there are no errors in the logs.  I have exchanged the AP with another device and the same issue occured when moved to a new location.  Additionally, I have Rebooted the AMP services to ensure that something isn't stuck with the service.  

Occasional Contributor I
Posts: 6
Registered: ‎09-30-2014

Re: Airwave AP Heat Map

Restarted AMP and it fixed the issue.  

Aruba
Posts: 1,283
Registered: ‎08-29-2007

Re: Airwave AP Heat Map

Hitting the refresh button as well. Sometimes going up a floor, then back again.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Search Airheads
Showing results for 
Search instead for 
Did you mean: