Network Management

Reply
Contributor I
Posts: 86
Registered: ‎07-08-2013

Airwave SNMP Get Failed

Aruba controller manually added to Airwave (8.0.7) with SNMPv3 user credentials.  Group is confirmed configured for SNMPv3.  Controller (6.1 code) configured with matching SNMPv3 user credentials.  The controller never comes up in Airwave.  When the controller is selected to Manage, under the Device Communnication section, it displays: This device is currently using SNMP version 2c.

MVP
Posts: 702
Registered: ‎12-01-2010

Re: Airwave SNMP Get Failed

I'm in the same boat, (see my thread on the same subject)

I've got a TAC case open. If I learn anything I'll update my thread.

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
MVP
Posts: 702
Registered: ‎12-01-2010

Re: Airwave SNMP Get Failed

Resolution was to restart the AP Watcher and SNMP Fetcher processes on Airwave.

Killing processes isn't for the faint of heart, so you may just want to restart Airwave (or reboot) as a test.

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
New Contributor
Posts: 1
Registered: ‎05-24-2016

Re: Airwave SNMP Get Failed

I was setting up a new instace of AMP and new controllers, did hours of Tshooting and rebooting AMP helped. This should be marked as a solution.

Search Airheads
Showing results for 
Search instead for 
Did you mean: