Network Management

Reply
New Contributor

[Airwave] VisualRF Plan not accurate display

Hi everyone,

 

       I have a problem for Test Airwave VisualRF Plan but Display incorrect position.

 

Airwave.png

 

 

Help me please!!

Guru Elite

Re: [Airwave] VisualRF Plan not accurate display

Please search Airwave help for "Increasing Location Accuracy"



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: [Airwave] VisualRF Plan not accurate display

I suggest making sure the size of the floor plan is as accurate as possible but are you running 8.0.0 or 8.0.1? if you search on the forum for visualrf and airwave 8.0 you will find a post regarding a possible issue with the html5 version of visualrf.

if you switch back to the old flash based version is it more accurate?
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
MVP

Re: [Airwave] VisualRF Plan not accurate display

Which device is really at that position? and what does the black circle represent?

 

We experienced some issues with accuracy on the heatmap, but the location seemed pretty good on 8.0.0.0 and upgradeing to 8.0.0.1 has helped.

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Guru Elite

Re: [Airwave] VisualRF Plan not accurate display

Just


Nirut wrote:

Hi everyone,

 

       I have a problem for Test Airwave VisualRF Plan but Display incorrect position.

 

Airwave.png

 

 

Help me please!!


Just looking at your diagram, I would say that you do not have enough density for an accurate fix.  You need AT LEAST 3 access points on the same channel as the client for a reasonable location calculation.  Assuming that all three of those are not on the same channel, you do not have that requirment.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor

Re: [Airwave] VisualRF Plan not accurate display

I setup follow document " "Increasing Location Accuracy"".It not work.

New Contributor

Re: [Airwave] VisualRF Plan not accurate display

Hi Evenone,

 

We try setup airwave follow parameter and debug.please see below.

 

Airwave info:

Version : 8.0.1

HTML5 : off

RTLS port : 5050

AP Channel provide :

Device Status.png ** I don't know. Why will be setup same channel? 

 

log debug  :

I can receive log but not see detail

 

Log.png

 

 

airbus_snoop rtls_tag_report : not display anything.

 

and When disable HTML5 VisualRF Plan display client see picture below.

 

FL_Plan.png

 

if you want information please tell me.

 

Nirut Sattapan

Aruba Customer

 

Guru Elite

Re: [Airwave] VisualRF Plan not accurate display

You simply do not have enough access point density for location tracking.  Typically you need 3 access points on the same channel as the client to be able to triangulate the client.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: [Airwave] VisualRF Plan not accurate display

Hi,

 

We have the same problem as you describe.

 

As you can see, we have in this map 8 APs and visual RF is not working:

 

foto_map.PNG

 

How could we fix this??

 

Thank you, 

 

JMG

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: