05-05-2016 07:49 AM
Our actual Airwave has 4+ year. We are running version 184.108.40.206 and the backup size (nightly_data001.tar.gz) are very large: 18GB.
The envirolment has 5 controllers and ~600 Access Points.
What we can do to decrease the size of this file? What files/old reports can be deleted via CLI.
Solved! Go to Solution.
05-05-2016 08:30 AM
Below are couple of things which you could check,
* Number of days set for historical retention under Amp setup --> General page. We can tweek the days according to our requirement
* Check whether we are receiving syslogs from the controllers in debug mode. If we are we can change the logging level on the controller to error or warning from debug. Syslogs can be seen under System --> Syslogs & Traps tab on Airwave
* Check the output for below command from AIrwave CLI, which would show us the tables which are taking up more space
05-05-2016 01:39 PM
The dbsize show me a lot of aggregate_session_* tables with more than 1048864 KiB.
1048864 KiB aggregate_session_1461668493
1048944 KiB aggregate_session_1462192425
1049088 KiB aggregate_session_1461086502
1049144 KiB aggregate_session_1460680406
1049368 KiB aggregate_session_1462302465
1049416 KiB aggregate_session_1460411849
1049424 KiB aggregate_session_1460486983
1049496 KiB aggregate_session_1460033022
1049760 KiB aggregate_session_1460372855
1049944 KiB aggregate_session_1460637222
1050072 KiB aggregate_session_1460934319
1050584 KiB aggregate_session_1461592425
1050728 KiB aggregate_session_1459953810
1051248 KiB aggregate_session_1459878343
1051552 KiB aggregate_session_1461853183
1051672 KiB aggregate_session_1461777111
1051704 KiB aggregate_session_1461010527
1051744 KiB aggregate_session_1461702097
1051984 KiB aggregate_session_1460561494
1051992 KiB aggregate_session_1462233929
1052128 KiB aggregate_session_1462377577
Have some command to clean old DB history?
05-05-2016 01:47 PM - edited 05-05-2016 01:48 PM
It mainly deals with the AppRF data. What is the GB size we have given for "AppRF Storage Allocated" under Amp Setup general page? For how many days we wish to store AppRF data on the server? Also, could you share the last tables which are showing up in the debsize output? Ones towards the end would be the top tables.