Network Management

Reply
New Contributor
Posts: 3
Registered: ‎01-14-2015

Airwave install

Good day,

 

We would like to do a new install of Airwave for our client.

The client currently has a blank server on which we will have to load Airwave. For this install do we only download the .iso image and burn it to a disk?

On the server we will then set it to boot to disk which should kick off the normal install process?

 

Thanks

Guru Elite
Posts: 20,582
Registered: ‎03-29-2007

Re: Airwave install

Yes.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Moderator
Posts: 1,251
Registered: ‎10-16-2008

Re: Airwave install

The installation is documented in the installation guide (http://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=14100).  If this guide is not sufficient, please let us know so that we can make it as thorough as possible.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
Showing results for 
Search instead for 
Did you mean: