Network Management

Reply
Occasional Contributor I

Airwave monitoring client's bandwidth usage

Hi community,

i'm trying to use Airwave 8.2.3.1 to monitoring a network, based on IAP and hp switches, all added and installed.
The goal is to know when a client and which cilent is saturating/using too much network, but i can see only AP's usage not clients.
I'll need it on real time so... no reports.
There is a function that i missed? Or have any ideas?

If i can ask a second thing, i have switches which have lan clients, i can see "neighbors" and "connected devices" correctly, but can't see any client.

Thanks

Aruba Employee

Re: Airwave monitoring client's bandwidth usage

Hi,

 

We could either create a custom view in clients>connected page to see the client usage section or set a client usage trigger from system>trigger page.

 

Regarding HP switch clients not showing in Airwave , may i now the model/firmware version?

Regards,

Pavan

Occasional Contributor I

Re: Airwave monitoring client's bandwidth usage

Hi Pavan,

on clients>connected is very useful, i searched it on "All" and there isn't a "usage" section, but can't be sort for usage? I can use a trigget to alert then going to "connected" and see who, but if i can sort for usage will be more easy to view.

Switches are:

HP J8770A 4204vl

HP J9022A 2810-48g

HP J9028B v1800-24g
HP J9776A 2530-24g

HP J9728A 2920-48g
HP J9853A 2530-48g

 

firmware is the latest updated on april (i can't reach them in this moment for write the exact name).

Aruba Employee

Re: Airwave monitoring client's bandwidth usage

Hi,

 

It is avaiable in client>connected pag, click on Arrow, it will ist New View option , click on this to create custom view.

ALE.PNG

 

Attached latest support device, guide, it looks we does not have complete support for the listed version.

 

Regards,

Pavan

Occasional Contributor I

Re: Airwave monitoring client's bandwidth usage

Hi,

What i meant is that i can't sort/order the view based on usage, but i use a trigger to alert when a client go over a certain usage.

Ok then i can't see lan client because switches aren't supported.

Thanks for help

Occasional Contributor I

Re: Airwave monitoring client's bandwidth usage

For switches there is something to do?
Cause my customer want a total control, if Airwave can't control lan clients he'll leave this project.
Portal for request a features redirect to HPE, and is now available at the moment.

edit: i have to open another topic or i can use this?

Aruba Employee

Re: Airwave monitoring client's bandwidth usage

Hi,

I would recommand to file feature request and follow up with your accounts team for update.

 

If you have any different queries, please open new topic.

 

Regards,

Pavan

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: