Network Management

Reply
New Contributor
Posts: 2
Registered: ‎02-10-2014

Airwave root password changed

[ Edited ]

Hi,

 

Unfortunately I forgot my root password for the CLI. I successfully changed this password and I was able to use the CLI again.

However I'm not able to browse to the web page HTTPD daemon is running. Even after rebooting multiple times in which during the reboot you can see that all the process startup correctly.

 

Does anyone over here has an idea how I can solve this ?

I used these instructions  to change my root password :

http://community.arubanetworks.com/t5/AirWave-and-Network-Management/Resetting-Airwave-Root-Password/td-p/9039

New Contributor
Posts: 2
Registered: ‎02-10-2014

Re: Airwave root password changed

[ Edited ]

Thats weird... I havent changed anything and now the http is reachable.

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: Airwave root password changed

Those processes sometimes can take up to 10 min to start.

at the root prompt next time, type 'wd' and it will watch the processes every second at which point you can see when they all start up
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: