Network Management

Reply
Occasional Contributor II
Posts: 13
Registered: ‎04-21-2014

AppRF data missing from local controller AP's.

We have master/local setup and we decided to move all of our AP's to local (aruba recommended). Ever since we made the move, none of the AppRF data (only see mininmal lldp/udp traffic)  shows up on the on AirWave. We have AppRF enabled on both controllers and has only worked on the master prior to merging all AP's to the local. Is there something I'm missing on the AirWave or the local controller to get the AppRF to display on AirWave. 

AirWave AppRF view for all clients:

aw-apprf.PNG

Guru Elite
Posts: 8,053
Registered: ‎09-08-2010

Re: AppRF data missing from local controller AP's.

Do you have amon enabled on the local controller? 

Sent from Nine

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Occasional Contributor II
Posts: 13
Registered: ‎04-21-2014

Re: AppRF data missing from local controller AP's.

Looks like it's not enabled on the local and AMON vs SNMP polling is disabled, not sure if these option matters.

amon-mas-loc.PNG

aw-amon.PNG

Guru Elite
Posts: 20,426
Registered: ‎03-29-2007

Re: AppRF data missing from local controller AP's.

The airwave option does not matter.

Not having it enabled on the local controller matters.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: