03-04-2016 06:51 AM
I totally schrewed things up. In the Rap Wizard i activated firewall on all ports, so now I cant reach the web interface at all. I would like to remove that firewall from all ports so that I will be able to use the Web GUI again. What I tried to do was to have a RAP and have that RAP to provide DHCP and be able to reach datcenter servers. Could anyone help me with what commands I need to run to get back the web GUI again
Solved! Go to Solution.
03-04-2016 07:00 AM
You need to find a way to VPN in and fix your issue. If you cannot get to the controller using a RAP, you need to find another way to do so...
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
03-04-2016 08:19 AM - edited 03-04-2016 08:19 AM
You can either modify the ACL applied to your interface or remove it from the interface.
show interface gig X/X access-group
Check which policies you have applied to your interface and removed them
interface gig X/X
no ip access-group AccesGroup
If you need more specific commands or more help, could you provide output from your CLI?
ACMX #567 //ACCP//CWNA//CWAP