Network Management

Reply
Contributor I
Posts: 81
Registered: ‎03-18-2013

Controller audit in Airwave shows list for Rogue AP

Controller audit in Airwave shows list for Rogue AP but all of the MAC addresses are Aruba APs. Where can I change a setting to automatically cahnge them from Unclassified to Valid?

Guru Elite
Posts: 20,578
Registered: ‎03-29-2007

Re: Controller audit in Airwave shows list for Rogue AP

Are you sure that they are your Aruba APs?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 81
Registered: ‎03-18-2013

Re: Controller audit in Airwave shows list for Rogue AP

Yes. I do a search in Airwave on the MAC address and it shows one of my Aruba APs

Guru Elite
Posts: 20,578
Registered: ‎03-29-2007

Re: Controller audit in Airwave shows list for Rogue AP

Access points can be classified differently in Airwave than the controller based on manual classification or rules that you set in Airwave under RAPIDS. Please take a look at your rules or see if the devices have been manually classified as Rogue under rapids. Just reclassify them as valid and see if they stay that way.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 81
Registered: ‎03-18-2013

Re: Controller audit in Airwave shows list for Rogue AP

Thanks Colin. I played around with the rules in RAPIDS and that did the trick. Thanks again.

Guru Elite
Posts: 20,578
Registered: ‎03-29-2007

Re: Controller audit in Airwave shows list for Rogue AP

Awesome



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: