Network Management

Reply

Creating an Alert for failed WPA2

Hi Airheads,

I tried to create a trigger that will alert the GUI icon , when

wlsxMgmtUserAuthenticationFailed is being sent from an SNMP trap.

(Because not all auth failuers are due 802.1x)

 

Attached screenshot:

1.jpg2.jpg

 

Please advise how to accomplish this need.

 

Thanks.

 

Asa

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Aruba Employee

Re: Creating an Alert for failed WPA2

Hi,

 

Use wlsxNUserAuthenticationFailed trap event in trigger condition,This trap indicates that a user authentication has failed.

 

Regards,

Pavan

Re: Creating an Alert for failed WPA2

Thanks - but did u looked on the screenshots..that what i did - without results , even due , i checked the AW snmp trap logs , and i can see events like this.

 

Please advise

 

Me

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Aruba Employee

Re: Creating an Alert for failed WPA2

Hi,

 

Trap which I shared is different, try below condition along with trap which you are using

5.PNG

 

Regards,

Pavan

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: