Network Management

Reply
Contributor I
Posts: 20
Registered: ‎11-10-2016

Different value and unit reported for transmit power

I've been monitoring channel transmit power from Airwave. But then I decided to make a report out of it. Opun producing the report from Airwave report, I stumble into a problem to determine which value is correct between the dashboard and report and why does the transmit power reported from Airwave does not have any unit..?

Mohamad Syafiqul Haziq,
System Engineer, Mesiniaga Berhad.
MVP
Posts: 1,011
Registered: ‎04-13-2009

Re: Different value and unit reported for transmit power

Hi,

 

The transmit power on the report is in dBm.

 

Similar post.

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
Showing results for 
Search instead for 
Did you mean: