Network Management

Reply
New Contributor
Posts: 5
Registered: ‎03-25-2015

Does Aruba clarity work with 3600 controllers and RAPs (configured to bridge local)?

Just wondering if this can work before spending time trying to make it work. 

3600 controllers are in DMZ - Airwave isn't. 

Airwave can see controllers - no issues there - should add this is monitor only mode.

Enabled amon and clarity but no data. 

Was wondering if this had anything to do with the fact that it's mainly RAPs in bridge local mode being used. 

 

Guru Elite
Posts: 19,982
Registered: ‎03-29-2007

Re: Does Aruba clarity work with 3600 controllers and RAPs (configured to bridge local)?

Clarity only works in Tunnel mode, unfortunately.

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
Search Airheads
Showing results for 
Search instead for 
Did you mean: