Network Management

Reply
Occasional Contributor I
Posts: 9
Registered: ‎08-20-2012

Does airwave support Multiple SNMP Trap Destinations?

[ Edited ]

Hi Folks,

 

Currently I have Airwave setup to send traps to one single destination where our ITNM server resides. I am setting up a new ITNM system and would like to forward traps to that location as well as the old one until the new location is fully tested, stable and setup.

 

Is it possible to setup multiple SNMP trap destinations in Airwave? I have only been able to find that it can send traps to one destination specified.

 

Any help would be greatly appreciated.

 

**EDIT**

nevermind,  figured it out under the NMS tab for NMS Integration. Yoyu can setup multiple NMS servers.

Contributor II
Posts: 40
Registered: ‎12-16-2011

Re: Does airwave support Multiple SNMP Trap Destinations?

Yep you got it, also notice you can set triggers to go to either one or both. You can test out some new triggers before you go into production with your new server.

New Contributor
Posts: 4
Registered: ‎10-07-2013

Re: Does airwave support Multiple SNMP Trap Destinations?

Hi All,

   What level of details can we pull from these traps if they are sent from Airwave to a NMS.  APs, Up/down, config, anything else?  Could we pull connectivity issues to Clearpass or Controllers as well?  Just thinking about the capabilities of the traps upstream.  

 

Thanks,

   -John

Search Airheads
Showing results for 
Search instead for 
Did you mean: