Network Management

Reply
Contributor II

Double SNMP-Traps from Airwave

Hi,

so we are passing snmp traps to an trap receiver from Airwave, I have question regarding that we are receiving one trap for the trigger and like one trap for the event. Thats how I interpret the traps. So what are triggering the event trap below (the second one)? And its comming 4 seconds after the first trigger..

 

------ 12:05:53 06/09/15 ---- New trap received
<UNKNOWN>
UDP: [10.10.7.5]:33891->[10.10.7.7]:162
SNMPv2-MIB::sysUpTime.0 0:0:00:00.10
SNMPv2-MIB::snmpTrapOID.0 AWAMP-MIB::downAP
AWAMP-MIB::awampEventID 2
AWAMP-MIB::awampEventSeverityCode 1
AWAMP-MIB::awampEventDescription "Device: FW-TAC-001-001 - https://xxx.se/ap_monitoring?id=119: Device Down Minutes Down Threshold >= 10 minutes."
AWAMP-MIB::awampAPIP 10.20.4.6

------ 12:05:57 06/09/15 ---- New trap received
<UNKNOWN>
UDP: [10.10.7.5]:11910->[10.10.7.7]:162
SNMPv2-MIB::sysUpTime.0 0:0:00:00.10
SNMPv2-MIB::snmpTrapOID.0 AWAMP-MIB::awampEvent#.63
AWAMP-MIB::awampEventID 2
AWAMP-MIB::awampEventSeverityCode 1
AWAMP-MIB::awampEventDescription "Device: FW-TAC-001-001 - https://xxx.se/ap_monitoring?id=119: Device Down Minutes Down Threshold >= 10 minutes."
AWAMP-MIB::awampAPIP 10.20.4.6
AWAMP-MIB::awampAPEthMAC
AWAMP-MIB::awampApName "FW-XXX-001-001"

Guru Elite

Re: Double SNMP-Traps from Airwave

Airwave is forwarding traps from the device as well as traps from its own internal event.  That's what it seems like.

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor II

Re: Double SNMP-Traps from Airwave

anyway to configure this?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: