Network Management

Reply
New Contributor

ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

I am trying to find out the ECCN and HTS codes for AP-205-F1 and the DS7000 and DS7200 series mobility controllers  

I believe for the AP it is HTS 8517.62.0050 ECCN 5A002.A.1.  Is it the same for the controllers as well?  Thank you for any help.

Moderator

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

Picking a few at random...

7010-USF1 Mobility Controller, FIPS/TAA, Restricted Regulatory Domain - US 8517620050 5A002 (A.1) ENC Restricted G157671 12/5/2014 US    
7240-USF1 Mobility Controller, FIPS/TAA, Restricted Regulatory Domain - US 8517620050 5A002 (A.1) ENC Restricted G157671 12/5/2014 US    
AP-205-F1 Access Point, FIPS/TAA 8517620050 5A992 NLR Mass Market Self-Classified   US    
---
Jon Green, ACMX, CISSP
Security Guy
New Contributor

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

Thank you.  Would you know for 7010-RWF1, 7030-RFW1, 7030-JPF1, 7205-JPF1, 7205-RWF1, 7210-JPF1, 7220-JPF1, 7220-F1, 7240-JPF1, and CP-VA-500?

I tried looking all over the site, but couldn't find the information. 

Moderator

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

The controllers are all the same, so it's the same as what I already posted.

 

CP-VA-500 is software.. as far as I understand it, export control doesn't apply to that.  There's no software SKUs listed in my spreadsheet anyway.

---
Jon Green, ACMX, CISSP
Security Guy

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

Correct, Bev confirmed there's no ECCN for software (Clearpass, AirWave, etc). 

Jerrod Howard
Sr. Techical Marketing Engineer
Aruba Employee

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

You stated there was no ECCN or HTS assigned to SW but how is this designated if the SW comes predeployed on an appliances (server) directly from Aruba?

 

Thanks,

Mark

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

APs and controller hardware have an associated ECCN/HTS code 

Any hardware appliances (servers for Clearpass or AirWave) would use the ECCN/HTS of the server vendor (which we can get if/when needed if not retreivable from said server vendor). Aruba provides no ECCN/HTS for the software itself (Clearpass, AirWave, etc)

Jerrod Howard
Sr. Techical Marketing Engineer
Aruba Employee

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

Hi Jerod,

 

Yes, could provide the ECCN and HTS for the DELL servres that have the 25k license CPPM deployed on it?

 

Thanks,

Mark

Re: ECCN and HTS codes for AP-205-F1 , the DS-7000 and DS_7200 series

That list is here - http://i.dell.com/sites/doccontent/shared-content/solutions/en/Documents/HTS-ECCN-CCATS-Reference-Table-ver15-02.pdf

 

We have had different server models go out over the years, so it's best to look it up on this table based on the hardware model you have. Depending on when you received your server, it could be an R610, R620, or R630 which should all share the same ECCN. 

Jerrod Howard
Sr. Techical Marketing Engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: