Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Enable and configure AppRF on Instant+Airwave

This thread has been viewed 2 times

  • 1.  Enable and configure AppRF on Instant+Airwave

    EMPLOYEE
    Posted Nov 05, 2015 04:02 PM

    Hi, I am trying to enable AppRF on a 225/205/103 cluster. They are currently running 6.4.3.1-4.2.0.2_52056

    I am managing them with Airwave 8.0.9

    I wanted to enable AppRF on this, the instructions I've found refer to the Virtual controller, but all of the management elements appear disabled once connected to Airwave. Is there a way to enable this from Airwave or am I missing something blindingly obvious?

     

     


    #AP225


  • 2.  RE: Enable and configure AppRF on Instant+Airwave
    Best Answer

    EMPLOYEE
    Posted Nov 05, 2015 04:04 PM

    airwave-instant-apprf.png



  • 3.  RE: Enable and configure AppRF on Instant+Airwave

    EMPLOYEE
    Posted Nov 05, 2015 04:23 PM

    So, it was blindingly obvious. I had not enabled "manage instant" on that custom group...but I had somehow allowed it to block mgmt on the VC level. Which seems like a bad combination to be able to do. :)

     

    Anyway, now it is obvious where to config. Thanks so much.



  • 4.  RE: Enable and configure AppRF on Instant+Airwave

    Posted Nov 06, 2015 09:35 AM

    if you want to manage IAPs by airwave and you added the airwave server, the GUI on the IAP itself is by default read-only, so you didn't really made that mistake ;-)