Network Management

Reply
Aruba Employee
Posts: 10
Registered: ‎10-27-2015

Enable and configure AppRF on Instant+Airwave

Hi, I am trying to enable AppRF on a 225/205/103 cluster. They are currently running 6.4.3.1-4.2.0.2_52056

I am managing them with Airwave 8.0.9

I wanted to enable AppRF on this, the instructions I've found refer to the Virtual controller, but all of the management elements appear disabled once connected to Airwave. Is there a way to enable this from Airwave or am I missing something blindingly obvious?

 

 

Guru Elite
Posts: 7,991
Registered: ‎09-08-2010

Re: Enable and configure AppRF on Instant+Airwave

airwave-instant-apprf.png


Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Aruba Employee
Posts: 10
Registered: ‎10-27-2015

Re: Enable and configure AppRF on Instant+Airwave

So, it was blindingly obvious. I had not enabled "manage instant" on that custom group...but I had somehow allowed it to block mgmt on the VC level. Which seems like a bad combination to be able to do. :)

 

Anyway, now it is obvious where to config. Thanks so much.

Frequent Contributor I
Posts: 77
Registered: ‎10-15-2012

Re: Enable and configure AppRF on Instant+Airwave

if you want to manage IAPs by airwave and you added the airwave server, the GUI on the IAP itself is by default read-only, so you didn't really made that mistake ;-)

Thomas
ACMX#370 ACCP

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
Showing results for 
Search instead for 
Did you mean: