Network Management

Reply
Contributor I
Posts: 52
Registered: ‎08-20-2014

Export Visual RF maps WITH APs displayed?

Hello,

 

Browsing the forum... don't see a way to do this: 

Can Airwave output PDF or even JPG/PNG of floorplans that include access points?

 

Like so:

capture.701.jpg

 

Currently I'm using screenshots, but I'd like to get be able to get something with higher resolution/quality, if possible.

 

 

 

Aruba Employee
Posts: 45
Registered: ‎04-24-2013

Re: Export Visual RF maps WITH APs displayed?

You can try the below,

 

  • Go to Visualrf 
  • Click on the list view for the maps
  • You would see download map option towards right

 

Visual.PNG

 

Regards,

Vishnu

Contributor I
Posts: 52
Registered: ‎08-20-2014

Re: Export Visual RF maps WITH APs displayed?

Sorry Vishnu, I'm asking for a map WITH APs displayed. Almost as if one were to create a PDF/PNG/ some file type of what is seen in Visual RF (without having to log in, click to the campus, building, floor).
 

1.not-this.jpg
 
this.jpg
 
I have been doing screenshots, but I assumed there must be a better approach?
Moderator
Posts: 1,244
Registered: ‎10-16-2008

Re: Export Visual RF maps WITH APs displayed?

Try this:

 

For an individual floor:

From the view that shows the building as a stack of floors (drill down into campus, then drill down into the building)

Right click on a floor -> bill of materials, uncheck all options -> ok

The output should be a word doc with the raw floor showing AP placement.

 

You can also do this from the campus view to get an entire building, or even from the network view to get the entire campus.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
AFK
Contributor I
Posts: 29
Registered: ‎12-12-2013

Re: Export Visual RF maps WITH APs displayed?

Works for me. Good info, Rob.

 

Contributor I
Posts: 52
Registered: ‎08-20-2014

Re: Export Visual RF maps WITH APs displayed?

Rob,

Thanks for the suggestion... unfortunately, I don't get any graphic, just a table listing AP info.

 

Like so:

Screenshot_013117_125645_PM.jpg

Moderator
Posts: 1,244
Registered: ‎10-16-2008

Re: Export Visual RF maps WITH APs displayed?

The word doc export should have a floor plan prior to the AP inventory table.

 

Mine returns:

bom-floorplan.jpg

 

If you're still not seing the floor plan like so, then please open a support case and a support engineer can help debug.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Contributor I
Posts: 52
Registered: ‎08-20-2014

Re: Export Visual RF maps WITH APs displayed?

Thanks, will do

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: