Network Management

Reply
New Contributor
Posts: 4
Registered: ‎02-21-2017

How do I get multiple BSSID information from multiple AP's?

Hello Team,

 

Our client needs the BSSID information of all the Access Points that we got. We can actually type: show ap bss-table to the AP's and get the information, the only problem is we have more than 1,500 AP's to look into and we do not have enough time to do so.

 

Is there any way we could do this before our deadline in 3days?

 

Thanks,

Gerald

Contributor II
Posts: 54
Registered: ‎12-01-2016

Re: How do I get multiple BSSID information from multiple AP's?

[ Edited ]

Thats the correct command. It will give you the required information for all APs.

 

Not sure what is the missing part here?

Jibran Aziz
ACDX | ACCP | ACMP | ACMA | CCIE (RnS, SP, DC) | JNCIS | JNCIA
Guru Elite
Posts: 20,762
Registered: ‎03-29-2007

Re: How do I get multiple BSSID information from multiple AP's?

What do you need to do and how do you need the information to be presented?


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 4
Registered: ‎02-21-2017

Re: How do I get multiple BSSID information from multiple AP's?

Hello,

 

Thanks for the reply. We have both setup.

The problem with the controller is that we have more than 1000 AP's to list the information from, but that command shows us the information we need.

 

 

New Contributor
Posts: 4
Registered: ‎02-21-2017

Re: How do I get multiple BSSID information from multiple AP's?

Hello,

 

I need it on a format that goes like this:
AP# | SSID | AP IP Address | PHY | BSSID

I don't really need it in that order but I need the information from
AP1, AP2, AP3, AP4, AP5..... upto AP1500.

 

I want to view them all in just a single report.

 

Is there a way in Airwaves wherein I can see all these information?

I attached the view we have on Airwaves reporting.

Thank you so much for all your replies, I will look into all of them tomorrow. It's the end of my shift and I wouldn't like to miss the bus LOL.

New Contributor
Posts: 4
Registered: ‎02-21-2017

Re: How do I get multiple BSSID information from multiple AP's?

Thanks for all your replies!

I am attaching a pic, I want to run this command for all the AP's of all my locations.(kinda confusing)
We can actually do this on one location, but I want to do it on all the 1000 locations in one go.

How can I do this in the reporting?

Thanks!
I'll get back to you tomorrow.

Guru Elite
Posts: 20,762
Registered: ‎03-29-2007

Re: How do I get multiple BSSID information from multiple AP's?

What do you need to do with the information?  Typing "show ap bss-table" will give you all of the information and it would be searchable in a text file.  You can then proceed to use any excel wizardry you want to sort and create the columns you want...



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: