Network Management

Reply
Contributor I
Posts: 103
Registered: ‎12-26-2014

How to Configure SMTP settings on Airwave?

How to configure SMTP on airwave so I can recive emails on erros and so on,

 

I have read alot but didn't get where I add the email and password of email?

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: How to Configure SMTP settings on Airwave?

on the AMP Setup page, you can configure the Email server there.

 

You can also configure a relay server.

 

 

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
MVP
Posts: 341
Registered: ‎04-25-2013

Re: How to Configure SMTP settings on Airwave?

hi

to configure Airwave as a an SNMP Client  you go to

AMP Setup > NMS  then you add a new SNMP server.

 

NMP.png

Regards

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: How to Configure SMTP settings on Airwave?

Not SNMP, SMTP... :)
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
MVP
Posts: 341
Registered: ‎04-25-2013

Re: How to Configure SMTP settings on Airwave?

ok ,  i haven't   seen it  :)

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Contributor I
Posts: 103
Registered: ‎12-26-2014

Re: How to Configure SMTP settings on Airwave?

Dears I have Tried to add the line but gives this

 

[root@localhost postfix]# main.cf: relayhost = [mail.airwave.com]
-bash: main.cf:: command not found
[root@localhost postfix]#

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: How to Configure SMTP settings on Airwave?

You can configure the relay host via the webUI.

In order to do it via the CLI, you need to edit main.cf with an editor like 'vi'
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Contributor I
Posts: 103
Registered: ‎12-26-2014

Re: How to Configure SMTP settings on Airwave?

Thanks but how to do it with VI as it is my first time with Airwave and I need to know more about it

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: How to Configure SMTP settings on Airwave?

Airwave uses postfix

For general basic configuration go here

http://www.postfix.org/BASIC_CONFIGURATION_README.html

 

As for Airwave, goto AMP setup -> General

You will see the following, choose yes to enable the mail server, then go create triggers

If you want to use a relay, you can set an IP address and test as well.

If you need to use something like a Gmail smtp server which requires authentication, then refer to the postfix help forums on how to configure that.

Capture.JPG

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Contributor I
Posts: 103
Registered: ‎12-26-2014

Re: How to Configure SMTP settings on Airwave?

have done this but it didn't work : for example :

 

My configs: Use embaded system :yes

to 123@gmail.com

from 123@gmail.com

send

 

it said msg sent successfully

 

but now msg apears at all

Search Airheads
Showing results for 
Search instead for 
Did you mean: